Osburn Insert, 2000 Wood Stove

US$762.64

Description

Description

With its 2.4 cubic foot firebox, the Osburn 2000 insert offers an alternative to the people who love its freestanding counterpart. The two models share the same high quality combustion properties and many of the same features.

This appliance comes with a standard high-power, heat-activated 120 CFM fan strategically positioned to redistribute the heat from the firebox into the room.

The 2000 model is designed to receive an optional faceplate that can cover a masonry hearth up to 32 inches (81 cm) high and 50 inches (127 cm) wide. The door overlay is available in black or brushed nickel plated finishes and the faceplate trims too.

 

Required Accessories:

Requires the addition of one each of (A), (B) and (C) required accessories to complete the unit

A:

  • OA10220  Black Cast Iron Door Overlay
  • OA10221  Brown Cast Iron Door Overlay
  • OA10222  Gold Plated Cast Iron Door Overlay
  • OA10224  Brushed Nickel Cast Iron Door Overlay

B:

  • AC03410  Regular Faceplate - 29" X 44"

C:

  • OA10121  Brass Faceplate Trim Kit - 29" X 44"
  • OA10122  Black Faceplate Trim Kit - 29" X 44"
  • OA10123  Brushed Nickel Faceplate Trim Kit - 29" X 44"

Features

Features

Fuel type: Dry cordwood
Recommended heating area (sq.ft.):  500 - 2,100
Firebox volume (cu. ft.): 2.4
Maximum burn time: 8 h
Maximum heat output (dry cordwood): 75,000 BTU/h (22.0 kW)
Overall heat output rate (min. to max.): 12,500 BTU/h (3.7 kW) to 31,300 BTU/h (9.2 kW)
Average overall efficiency (EPA cribs / Douglas fir):

 69.5 % (HHV) 75.2 % (LHV)

Average overall efficiency (dry cordwood):

N.A. (HHV) N.A. (LHV) 

Optimum efficiency: 77.2 %
Average particulate emissions rate: 3.9 g/h
Average CO: 137.4 g/h

 

Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

(Average overall efficiency) As measured per CSA B415.1-10 stack loss method.

(HHV) Higher Heating Value of the fuel.

(LHV) Lower Heating Value of the fuel.

(Optimum efficiency) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

This appliance is officially tested and certified by an independent agency.

Specifications

Specifications

Maximum log length: 20"
Log positioning: Over width
Chimney diameter: 6"
Baffle type: C-Cast
Approved for a mobile home installation: No
Shipping Weight: 421 lb (191 kg)
Door type: Single, glass with cast iron frame
Glass type: Ceramic glass
Glass surface – dimensions (Width X Height): 17 1/4" x 9 1/2"
Glass air-wash system: Yes
Premium quality blower included (CFM): 120
Overall dimension (Height): 23 1/8"
Overall dimension (Width): 28 3/8"
Overall dimension (Depth): 26 1/2"
Door opening – dimension (Height): 9"
Door opening - dimension (Width): 17 1/2"
Firebox – dimension (Height):

11 7/8"

Firebox – dimension (Width): 21"
Firebox – dimension (Depth): 16 3/4"
Firebox lined with refractory bricks for better heat distribution: Yes
Stainless-steel secondary-air system improving gas combustion: Yes
Adjustable threaded legs: Yes
Steel thickness – body: 3/16"
Steel thickness – top: 5/16"
Centre line of flue outlet to the side: 13 1/2"
Centre line of flue outlet to the back: 6 7/8"
Fireplace opening – minimum (Height): 23 3/8"
Fireplace opening – minimum (Width): 28 7/8"
Fireplace opening – minimum (Depth): 15 3/4"
USA standard (emissions): EPA Method 28
Canadian Standard (emissions): CSA B415.1-10
USA standard (safety): UL 1482, UL 737
Canadian standard (safety): ULC S628
Tested and listed as per applicable standards: By an accredited laboratory (CAN/USA)
Warranty: Limited lifetime

 

Minimum clearances to combustibles* 
(Data expressed in inches. 1 inch = 25.4 mm)

  Canada USA
Clearance – top (measured from the platform on which the appliance is installed)** 84" 84"
Clearance – minimum floor protection in front of the appliance 18" 16"
* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).    

** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

   

 

 

 

Literature

Support

Support

Manuals: Operation and Installation

Owner's Manual Osburn 2000 Wood Stove Insert

To top