*Pricing reflects additional freight costs to Alaska.
Designed to meet the needs of smaller spaces, the Osburn 1700 combines robustness and elegance to allow you to enjoy your heating experience with confidence. This unit is equipped with high-density bricks, a cast iron door, a built-in ash pan, a top heat deflector that redirects heat to the front of the unit, and side panels to reduce its clearances. Exceeding air quality regulations with emissions as low as 1.26 g/h, the Osburn 1700's efficiency will save you time and money.
Requires the addition of one each of (A) and (B) required accessories to complete the unit
- OA10249 Black Door Overlay
- OA10250 Brushed Nickel Door Overlay
- OA10244 Pedestal With Ash Drawer
- OA10247 Black Cast Iron Traditional Legs With Ash Drawer
- OA10248 Brushed Nickle Cast Iron Traditional Legs With Ash Drawer
- AC01000 130 CFM Blower With Variable Speed Control (Thermodisc Included)
|Fuel type:||Dry cordwood|
|Recommended heating area (sq.ft.):||500-1,800|
|Firebox volume (cu. ft.):||1.9|
|Maximum burn time:||6 h|
|Maximum heat output (dry cordwood):||65,000 BTU/h (19 kW)|
|Overall heat output rate (min. to max.):||15,650 BTU/h (4.6 kW) to 23,300 BTU/h (6.83 kW)|
|Average overall efficiency (EPA cribs / Douglas fir):||
N.A (HHV) N.A. (LHV)
|Average overall efficiency (dry cordwood):||
70% (HHV) 75% (LHV)
|Optimum efficiency:||78 %|
|Average particulate emissions rate:||1.26 g/h|
|Average CO:||58 g/h|
Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.
Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
As measured per CSA B415.1-10 stack loss method.
Higher Heating Value of the fuel.
Lower Heating Value of the fuel.
Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
Optimum overall efficiency at a specific burn rate (LHV).
This appliance is officially tested and certified by an independent agency.
|High-efficiency EPA certified appliance||Yes, EPA 2020 approved|
|Maximum log length||18"|
|Log positioning||Over width|
|Flue outlet diameter||6"|
|Type of chimney||CAN/ULC S629, UL 103 HT (2100 °F)|
|Minimum chimney height (feet)||15'|
|Approved for an alcove installation||Yes|
|Approved for a mobile home installation||Yes, with fresh air intake|
|Shipping Weight||331 lb (150 kg)|
|Door type||Single, glass with cast iron frame|
|Glass type||Ceramic glass|
|Glass surface – dimensions (Width X Height)||15 3/4" x 9 3/8"|
|Glass air-wash system||Yes|
|Overall dimension (Height)||30 3/8"|
|Overall dimension (Width)||24 7/8"|
|Overall dimension (Depth)||23 1/4"|
|Door opening – dimension (Height)||8 3/4"|
|Door opening - dimension (Width)||17 1/4"|
|Firebox – dimension (Height)||11 7/8"|
|Firebox – dimension (Width)||19 5/8"|
|Firebox – dimension (Depth)||13 1/2"|
|Firebox lined with refractory bricks for better heat distribution||Yes|
|Stainless-steel secondary-air system improving gas combustion||Yes|
|Steel thickness – body||3/16"|
|Steel thickness – top||5/16"|
|USA standard (emissions)||EPA|
|Canadian Standard (emissions)||CSA B415.1-10|
|USA standard (safety)||UL 1482, UL 737|
|Canadian standard (safety)||ULC S627|
|Tested and listed as per applicable standards||By an accredited laboratory (CAN/USA)|
Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)
|Single wall pipe||Double wall pipe||Single wall pipe||Double wall pipe|
|Clearance – back wall||14 1/2"||6"||13"||6"|
|Clearance - corner||12"||12"||12"||12"|
|Clearance – side wall||10"||10"||10"||10"|
|Clearance – top (measured from the platform on which the appliance is installed)**||84"||84"||84"||84"|
|Clearance – minimum floor protection in front of the appliance||18"||16"|
*The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.