Duravent PelletVent Stove Pipe Roof Flashing DSA 0/12-6/12

3PVP-F6DS

Status: In Stock

US$25.19

Description

Description

The Duravent 3PVP-F6DS is a Roof Flashing DSA 0/12-6/12 from the Duravent PelletVent Pro line, 3 inch diameter. Roof flashing that seals the pipe where it passes through the roof. Choose the flashing that matches your roof pitch.

PelletVent Pro is Duravent's double wall, stainless steel inner liner venting system for pellet and corn burning stoves. Sections twist lock together with a gasketed seal, so no sealant is needed on the joints. Every PelletVent Pro component is listed as part of the system, so use matching PelletVent Pro parts throughout the run to keep the listing and the clearances valid. Check the appliance manual for the vent size and type it requires before ordering.

Rural Energy stocks the full Duravent PelletVent Pro line, along with the stoves and heaters it vents, and ships to dealers, contractors, and homeowners.

Features

Features

DURAVENT PELLETVENT PRO
Listed component of the PelletVent Pro pellet stove and corn stove venting system.

  • 3 inch diameter, fits other PelletVent Pro components of the same size
  • Factory built and tested to the system listing
  • Use matching PelletVent Pro parts throughout the run

IN STOCK AT RURAL ENERGY
Rural Energy keeps Duravent venting on the shelf and ships it fast.

  • Ships quickly to dealers, contractors, and homeowners
  • Help from Rural Energy support staff planning a complete vent run
  • Part of the full Duravent line we carry

Specifications

Specifications

Part Number: 3PVP-F6DS
Brand: Duravent
Product Line: PelletVent Pro
Component: Roof Flashing DSA 0/12-6/12
Diameter: 3 inch
Use: pellet stove and corn stove venting

Support

Support

Product FAQ

Q. WHAT IS THE 3PVP-F6DS?

A. It is the PelletVent Pro 3 inch DSA roof flashing, made to seal the vent pipe where it passes through a low pitch roof.

Q. WHAT ROOF PITCHES DOES IT COVER?

A. This flashing is rated for roof pitches from 0/12 up to 6/12, so it fits flat to moderately sloped roofs.

Q. WHAT DOES THE DSA STYLE MEAN?

A. DSA is a deck and shingle adjustable flashing base, built for lower slope roofs, unlike the tall cone flashing used on steep roofs.

Q. WHAT SIZE VENT DOES IT FIT?

A. It is sized for 3 inch PelletVent Pro pipe, so use it with other 3 inch components from the same system.

Q. DOES THE VENT PIPE NEED SEALANT AT THE JOINTS?

A. No, PelletVent Pro sections twist lock together with a gasketed seal, so no sealant is needed on the pipe joints themselves.

Q. CAN I MIX THIS WITH OTHER VENT BRANDS?

A. It can be connected to other brands using the right transition fitting, but we recommend using matching PelletVent Pro parts for the full run whenever possible to keep the system's UL listing and clearances valid.

To top