Zoom

Rinnai Electrode Packing

554F-147

Models: 431, 263FA, 431Wta

Status: In Stock

US$1.99

Description

Description

The Rinnai 554F-147 is a genuine Electrode Packing for Rinnai EnergySaver direct vent wall furnaces (confirm by model and serial number). Gasket that seals the igniter electrode where it enters the burner box. Install a new packing any time the electrode is removed.

This is an OEM Rinnai part, so it fits and performs the way the original did. Confirm your model before ordering; the model is on the rating label on the unit. If you are not sure which part you need, Rural Energy support can check it against your model and serial number.

Rural Energy is a Rinnai distributor and keeps Rinnai direct vent wall furnace parts in stock for fast shipping to dealers, contractors, and homeowners.

Features

Features

GENUINE RINNAI PART
Factory part made to the original specification.

  • Fits Rinnai EnergySaver direct vent wall furnaces (confirm by model and serial number)
  • Exact replacement, no modification needed
  • Same materials and fit as the part installed at the factory

IN STOCK AT RURAL ENERGY
Rural Energy keeps Rinnai parts on the shelf and ships them fast.

  • Ships quickly to dealers, contractors, and homeowners
  • Technical help from Rural Energy support staff if you need to confirm fitment
  • Part of the full Rinnai parts and venting line we carry

Specifications

Specifications

Part Number:554F-147
Brand:Rinnai
Part Type:Electrode Packing
Fits Models:Rinnai EnergySaver direct vent wall furnaces (confirm by model and serial number)
Category:Direct vent wall furnace part
Genuine OEM:Yes

Literature

Literature

Support

Support

 
People Also Ask:

Q. What is the Rinnai 554F-147 Electrode Packing best used for?

A. The Rinnai 554F-147 Electrode Packing is a genuine OEM replacement gasket designed for compatible Rinnai 431, 263FA, and 431WTA direct vent heaters. It helps create the proper seal around the electrode assembly during heater maintenance or repair.

Q. Which Rinnai heater models use the 554F-147 Electrode Packing?

A. The Rinnai 554F-147 Electrode Packing is listed for compatible Rinnai 431, 263FA, and 431WTA heater models. Always confirm the complete model number and check the manufacturer's parts diagram before ordering.

Q. Is the Rinnai 554F-147 a genuine OEM replacement part?

A. Yes. The Rinnai 554F-147 is a genuine OEM replacement part manufactured for compatible Rinnai heating equipment. An OEM gasket is designed to match the original dimensions and installation requirements of the electrode assembly.

Q. Why should worn electrode packing be replaced?

A. Electrode packing can compress, crack, or deteriorate after exposure to heat and repeated servicing. Replacing worn packing helps restore the seal around the electrode and maintain the heater's original factory assembly.

Q. Should the Rinnai 554F-147 be replaced when the electrode is removed?

A. The packing should be inspected whenever the electrode assembly is removed or serviced. If it is compressed, torn, brittle, or otherwise damaged, replacing it with the Rinnai 554F-147 helps provide a proper seal during reassembly.

Q. Is the Rinnai 554F-147 Electrode Packing easy to install?

A. Installation should be completed by a qualified HVAC technician familiar with Rinnai heater service procedures. The appliance should be disconnected from power and gas, and all mating surfaces should be inspected and cleaned according to the service instructions before the new packing is installed.

Q. What parts are commonly inspected with the Rinnai 554F-147 Electrode Packing?

A. During electrode or burner service, technicians commonly inspect the electrode, igniter, flame rod, flame rod gasket, burner gaskets, wiring connections, and related fasteners. Any replacement part should be matched to the exact Rinnai heater model.

Q. Can the Rinnai 554F-147 be used on other heater brands?

A. No. The Rinnai 554F-147 is designed for specified Rinnai heating equipment and should not be substituted for packing used by another manufacturer. Use only the part number identified for the appliance being serviced.

Q. How does the Rinnai 554F-147 compare with generic gasket material?

A. The Rinnai 554F-147 is an OEM part shaped and sized for its intended electrode assembly. Generic gasket material may require fabrication and may not provide the same dimensions or fit, so the specified Rinnai part is the appropriate choice when listed for the heater.

Q. Why buy the Rinnai 554F-147 Electrode Packing from Rural Energy?

A. Rural Energy supplies Rinnai replacement parts and supports homeowners and HVAC professionals working in demanding cold-climate environments. Verifying the heater model and OEM part number before ordering helps reduce installation delays and keeps essential heating equipment operating reliably.

Customers who bought this item also bought

To top