Zoom

Duravent Stove Pipe DuraTech Elbow Kit 15 Degree SS, 6"

6DT-E15KSS

Status: In Stock

US$551.99

Description

Description

The Duravent 6DT-E15KSS is a Elbow Kit 15 Degree, Stainless, 6" from the Duravent DuraTech line, 6 inch diameter. Elbow kit with two elbows and a strap for offsetting the chimney around a rafter or obstruction.

DuraTech is Duravent's Class A all-fuel chimney system: a double wall pipe with a stainless steel inner liner and insulation for wood stoves, fireplaces, and oil or gas appliances that need a factory built chimney. Every DuraTech component is listed as part of the system, so use matching DuraTech parts throughout the run to keep the listing and the clearances valid. Check the appliance manual for the vent size and type it requires before ordering.

Rural Energy stocks the full Duravent DuraTech line, along with the stoves and heaters it vents, and ships to dealers, contractors, and homeowners.

Features

Features

DURAVENT DURATECH
Listed component of the DuraTech Class A all-fuel chimney system.

  • 6 inch diameter, fits other DuraTech components of the same size
  • Factory built and tested to the system listing
  • Use matching DuraTech parts throughout the run

IN STOCK AT RURAL ENERGY
Rural Energy keeps Duravent venting on the shelf and ships it fast.

  • Ships quickly to dealers, contractors, and homeowners
  • Help from Rural Energy support staff planning a complete vent run
  • Part of the full Duravent line we carry

Specifications

Specifications

Part Number:6DT-E15KSS
Brand:Duravent
Product Line:DuraTech
Component:Elbow Kit 15 Degree, Stainless, 6"
Diameter:6 inch
Use:Class A all-fuel chimney

Literature

Literature

Support

Support

 
People Also Ask:

Q. What is the DuraVent 6DT-E15KSS 15° Elbow Kit used for?

A. The DuraVent 6DT-E15KSS is a genuine 15-degree stainless steel elbow kit designed for compatible 6-inch DuraTech chimney systems. It allows the chimney to safely change direction when an offset is required to navigate structural obstacles during installation.

Q. When should a 15-degree chimney elbow kit be used?

A. A 15-degree elbow kit is typically used when a slight chimney offset is needed to avoid framing members, roof structures, or other building obstacles. Always follow DuraVent installation instructions for allowable offsets and support requirements.

Q. Which chimney systems are compatible with the DuraVent 6DT-E15KSS?

A. The DuraVent 6DT-E15KSS is designed specifically for compatible 6-inch DuraTech chimney systems. Always verify chimney diameter, product series, and appliance compatibility before purchasing.

Q. Does a 15-degree elbow affect chimney draft?

A. A properly designed and installed offset has minimal effect on chimney performance when it complies with DuraVent installation guidelines. Proper chimney height, support, and offset limitations remain essential for optimal draft.

Q. Can the DuraVent 6DT-E15KSS be used with another manufacturer's chimney system?

A. No. The DuraVent 6DT-E15KSS is engineered specifically for compatible DuraVent DuraTech chimney systems. Mixing components from different manufacturers may affect fit, safety, and certification compliance.

Q. Should the DuraVent 6DT-E15KSS Elbow Kit be professionally installed?

A. Yes. Professional installation is recommended to ensure the chimney offset is properly supported, aligned, and installed according to DuraVent instructions and local building codes.

Q. What is included with the DuraVent 6DT-E15KSS 15° Elbow Kit?

A. The DuraVent 6DT-E15KSS includes the components required for a compatible 15-degree DuraTech chimney offset. Refer to the manufacturer's product specifications for the complete list of included components. Additional chimney pipe, supports, and accessories are sold separately unless otherwise specified.

Q. Why choose a 15-degree elbow instead of a larger offset?

A. A 15-degree elbow creates a gentler chimney offset that may help preserve chimney draft while providing enough clearance around minor structural obstacles. The appropriate elbow angle depends on the installation layout and DuraVent design requirements.

Q. What should I verify before purchasing the DuraVent 6DT-E15KSS?

A. Before purchasing, verify your chimney diameter, confirm your installation uses a compatible 6-inch DuraTech chimney system, and review the DuraVent installation manual to ensure a 15-degree offset is appropriate for your chimney layout.

Q. Why buy the DuraVent 6DT-E15KSS Elbow Kit from RuralEnergy.com?

A. RuralEnergy.com supplies genuine DuraVent chimney components backed by knowledgeable technical support and decades of experience in residential heating systems. Purchasing the DuraVent 6DT-E15KSS 15° Stainless Steel Elbow Kit from Rural Energy helps ensure authentic products, verified compatibility, and dependable customer service.

Customers who bought this item also bought

Rural Energy Enterprises
6637 Arctic Spur Rd
Anchorage, AK 99518
Phone 907-278-7441
Toll-Free 800-770-7330
Support 907-868-7952

 

Dealer Inquiries Welcome

We offer various products to businesses throughout the United States and Canada. We are currently accepting new dealers in the Pacific Northwest and Canada.

Apply to Become a Dealer

Your subscription could not be saved. Please try again.
Your subscription has been successful.

Newsletter

Subscribe to our newsletter and stay updated.

Copyright 2019-2026 Rural Energy Enterprises Inc. All Rights Reserved.

© Rural Energy. All rights reserved.

To top