The DuraVent 6DT-F6 Adjustable Roof Flashing, part number 6DT-F6, is a 6-inch roof flashing component designed for use with DuraVent DuraTech chimney pipe systems. This flashing provides a weather-resistant seal where chimney pipe penetrates the roof and is adjustable for roof pitches ranging from 0/12 to 6/12. Constructed for exterior exposure, it helps protect against water intrusion while maintaining proper chimney system clearances.
This adjustable flashing is installed at the roofline to create a sealed transition between the chimney pipe and roofing material. Proper installation supports long-term weather protection and stable chimney alignment. It must be used only with compatible 6-inch DuraTech chimney components and installed according to manufacturer instructions.
Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6” over a horizontal distance of 12”. Made of galvalume. 6”-8” available with large base.
What’s Included: One DuraVent 6DT-F6 adjustable roof flashing for 6-inch DuraTech chimney systems.
Installation Limits: For use only with 6-inch DuraVent DuraTech chimney pipe systems on roofs with pitches from 0/12 to 6/12; installation must comply with manufacturer instructions and local building codes.
Compatibility: Compatible with 6-inch DuraVent DuraTech (6DT) chimney pipe components requiring roof flashing for 0/12–6/12 pitch applications.
