Bosch Remote Control for Therm 830, 940, 1210 & Greentherm

7709003213

Status: In Stock

US$215.00

Description

Description

The Bosch Remote Control for Therm 830, 940, 1210 and Greentherm, part number 7709003213, is a wired thermostat remote control accessory designed to allow temperature adjustment and status monitoring of compatible Bosch tankless gas water heaters from a remote location within the installation without requiring direct access to the heater control panel.

The 7709003213 remote control connects to the heater via a low-voltage wiring run and features an LCD display that presents the current temperature setting, active error codes, and operating function indicators. The unit allows the user to raise or lower the heater output temperature within the heater's operating range and to monitor heater status from the remote mounting location. The remote mounts to a standard single-gang electrical box and is intended for permanent wall installation at a convenient user-accessible location.

What's Included: Bosch remote control handset unit and mounting hardware for single-gang electrical box installation. Low-voltage connection wiring between the remote and the heater control panel is not included and must be sourced separately based on the specific installation distance and routing requirements.

Installation Limits: The 7709003213 remote control requires a low-voltage wired connection from the remote wall unit to the heater control panel. The remote does not operate wirelessly and must be physically wired to the heater. Only one remote control unit may be connected to a single compatible heater at a time. The remote does not provide error reset capability; error codes displayed on the remote must be cleared directly at the heater control panel. Installation must be performed in accordance with the heater installation documentation and applicable local codes.

Compatibility: The Bosch Remote Control part number 7709003213 is compatible with the Bosch Therm 830 ES Natural Gas (7703311076), Bosch Therm 830 ES Liquid Propane (7703411074), Bosch Therm 940 ES Natural Gas (7703311075), and Bosch Therm 940 ES Liquid Propane (7703411073) tankless gas water heaters, all available at RuralEnergy.com.

Features

Features

  • Wired thermostat remote control for compatible Bosch Therm 830 ES and Therm 940 ES tankless gas water heaters available at RuralEnergy.com
  • LCD display presents current temperature setting, active error codes, and operating function indicators from the remote wall-mounted location
  • Allows temperature adjustment within the heater's operating range from a permanent wall-mounted installation without approaching the heater unit directly
  • Mounts to a standard single-gang electrical box for clean, permanent wall installation at any user-accessible location within wiring distance of the heater
  • Single remote per heater installation — only one 7709003213 unit may be connected to a single compatible Bosch tankless water heater at a time
  • Error codes displayed on the remote must be cleared directly at the heater control panel — the remote does not provide remote error reset capability

Specifications

Specifications

Brand: Bosch
Part Number: 7709003213
Product Type: Wired Thermostat Remote Control
Display: LCD — temperature setting, error codes, and operating functions
Connection Type: Wired low-voltage connection to heater control panel
Mounting: Standard single-gang electrical box — permanent wall installation
Units Per Heater: One remote per compatible heater
Reset Capability: Temperature control only — no remote error reset function
Wiring Included: Not included — low-voltage connection wire must be sourced separately
Compatible Models at RuralEnergy.com: Bosch Therm 830 ES NG (7703311076), Therm 830 ES LP (7703411074), Therm 940 ES NG (7703311075), Therm 940 ES LP (7703411073)

 

The Bosch Remote Control part number 7709003213 is a wired temperature control accessory for the Bosch Therm 830 ES and Therm 940 ES tankless gas water heaters available at RuralEnergy.com, providing permanent wall-mounted remote temperature monitoring and adjustment without requiring direct access to the heater unit.

 

Support

Support

 
Product FAQ

Which Bosch tankless water heaters at RuralEnergy.com are compatible with the 7709003213 remote control?

The Bosch Remote Control part number 7709003213 is compatible with all four Bosch tankless gas water heater models currently available at RuralEnergy.com: the Therm 830 ES Natural Gas (7703311076), the Therm 830 ES Liquid Propane (7703411074), the Therm 940 ES Natural Gas (7703311075), and the Therm 940 ES Liquid Propane (7703411073). Customers with any of these four models may add the 7709003213 to enable wired remote temperature control from a permanent wall-mounted location.

What is the difference between the Bosch 7709003213 remote control and the Bosch TSTAT2 wireless remote?

The Bosch 7709003213 is a wired remote control that connects to the heater via a low-voltage wire run and mounts permanently to a single-gang electrical box on the wall. The Bosch TSTAT2 is a wireless remote control that transmits temperature commands via radio frequency to a receiver circuit board installed inside the heater control panel and is powered by two AA batteries. The 7709003213 supports only one remote per heater, while the TSTAT2 allows multiple units to be synchronized to a single heater. Both are available separately at RuralEnergy.com.

How is the Bosch 7709003213 remote control installed?

The 7709003213 remote control mounts to a standard single-gang electrical box installed at the desired wall location. A low-voltage wiring run is routed from the remote mounting location to the heater control panel, where the wire connects to the designated remote control terminals. The low-voltage connection wire is not included with the remote and must be sourced separately based on the distance and routing requirements of the specific installation. Installation must be performed in accordance with the heater installation documentation and applicable local electrical and plumbing codes.

Can the Bosch 7709003213 remote control reset error codes on the heater?

The 7709003213 remote control displays active error codes transmitted from the heater on its LCD screen but does not provide a remote error reset function. Clearing an active error code requires the user to go directly to the heater control panel to perform the reset. This limitation applies to all compatible models including the Bosch Therm 830 ES and Therm 940 ES units available at RuralEnergy.com. The remote's primary functions are temperature adjustment and status display.

Can more than one Bosch 7709003213 remote control be used with a single heater?

Only one Bosch 7709003213 remote control may be connected to a single compatible Bosch tankless water heater at a time. Installations requiring temperature control from more than one location should consider the Bosch TSTAT2 wireless remote, also available at RuralEnergy.com, which supports multiple units synchronized to a single heater and does not require a wired connection to the heater control panel.

What does the LCD display on the Bosch 7709003213 remote control show?

The LCD on the Bosch 7709003213 remote control displays the current temperature setting of the connected Bosch Therm 830 ES or Therm 940 ES heater, any active error codes being transmitted from the heater, and operating function indicators showing the current operational state of the unit. This allows the user to monitor heater status and adjust temperature from the remote wall location without visiting the heater. If an error code appears, the code should be noted and the reset performed at the heater control panel directly.

To top