Bosch Tronic 4000 C Electric Water Heater

7738007418

Status: In Stock

US$304.99

Description

Description

The Bosch Tronic 4000 C Electric Tankless Water Heater, part number 7738007418, is a 10.5-kilowatt point-of-use electric tankless water heater designed to deliver a continuous on-demand supply of hot water at one to two sinks simultaneously or at a single commercial sink, serving a wide range of residential, commercial, and mobile applications including apartments, RVs, mobile homes, boats, garages, warehouses, factories, stores, offices, restaurants, and hotels.

The TR4000C-10 features a solid copper heat exchanger with copper-sheathed elements housed in a compact and lightweight tough plastic enclosure, operating at 96% efficiency with no standby heat loss at a UEF of 0.95. The unit features front-mounted control of different power levels and an operating indicator light, operates on 208 or 240-volt supply with a double-pole 50-amp breaker, activates at a minimum flow rate of 0.55 gallons per minute, and carries a 5-year limited warranty.

The cold water inlet is located at the bottom left and the hot water outlet at the bottom right — a reversed connection orientation from legacy models this unit replaces.

What's Included: Bosch Tronic TR4000C-10 electric tankless water heater unit with mounting hardware. A dedicated 208 or 240-volt double-pole 50-amp hardwired circuit and all plumbing connections are not included and must be provided as part of the installation by a licensed electrician and plumber.

Installation Limits: The TR4000C-10 requires a dedicated 208 or 240-volt double-pole 50-amp hardwired circuit and must be installed by a licensed electrician in accordance with applicable local electrical and plumbing codes. The unit does not plug into a standard outlet. Working water pressure must be maintained between 7 and 115 psi. Hot water output temperature is dependent on incoming cold water temperature — lower incoming water temperatures reduce the achievable output temperature at a given flow rate.

The cold water inlet is at the bottom left and the hot water outlet is at the bottom right, which is reversed from legacy models — plumbing connections must be verified and adjusted accordingly during installation.

Compatibility: The Bosch Tronic TR4000C-10 (part number 7738007418) is the highest-kilowatt model in the Bosch Tronic 4000C series available at RuralEnergy.com and is a close functional replacement for the Powerstream Pro RP1P, the Powerstream RP1, the PowerStar AE9.5, and the Bosch Tronic 3000 US9. The companion models in the Tronic 4000C series available at RuralEnergy.com are the TR4000C-3 (part number 7738007415) at 3.5 kW and the TR4000C-6 (part number 7738007416) at 6.5 kW.

Features

Features

  • 10.5-kilowatt solid copper heat exchanger with copper-sheathed elements delivers a continuous on-demand supply of hot water at one to two sinks simultaneously or one commercial sink at 96% efficiency with a UEF of 0.95
  • Front-mounted power level control and operating indicator light provide on-unit adjustment and visual status monitoring without requiring access to an app or external device
  • No standby heat loss — heats only the water being drawn at the moment of use with no tank capacity limit on the duration of the hot water supply during a draw
  • Requires a dedicated 208 or 240-volt double-pole 50-amp hardwired circuit — activates at 0.55 gpm minimum flow with ½-inch NPT connections and a working pressure range of 7 to 115 psi
  • Cold water inlet at bottom left and hot water outlet at bottom right — connection orientation is reversed from legacy models and must be verified and adjusted when replacing a prior-generation unit
  • The highest-kilowatt model in the Bosch Tronic 4000C series at RuralEnergy.com — close functional replacement for the Powerstream Pro RP1P, Powerstream RP1, PowerStar AE9.5, and Bosch Tronic 3000 US9

Specifications

Specifications

Brand: Bosch
Part Number: 7738007418
Model: Tronic TR4000C-10
Product Type: Point-of-Use Electric Tankless Water Heater
Kilowatt Output: 10.5 kW
Voltage Requirement: 208V or 240V — dedicated hardwired circuit
Circuit Breaker Size: Double-pole 50-amp
Heat Exchanger: Solid copper with copper-sheathed elements
Housing: Tough plastic — compact and lightweight
Thermal Efficiency: 96%
UEF: 0.95
Heating Method: On-demand only — no tank, no standby heat loss
Power Level Control: Front-mounted — multiple power level settings
Operating Indicator Light: Yes
Minimum Activation Flow Rate: 0.55 gpm
Water Connections: ½" NPT — cold inlet bottom left, hot outlet bottom right
Working Water Pressure: 7 – 115 psi
Fixture Serving Capacity: One to two sinks simultaneously or one commercial sink
Warranty: 5-year limited
Legacy Replacement Models: Powerstream Pro RP1P, Powerstream RP1, PowerStar AE9.5, Bosch Tronic 3000 US9
Series Siblings at RuralEnergy.com: TR4000C-3 (7738007415), TR4000C-6 (7738007416)

 

The Bosch Tronic TR4000C-10 is the highest-kilowatt model in the Bosch Tronic 4000C electric tankless series available at RuralEnergy.com, delivering 10.5 kilowatts at 96% efficiency with a UEF of 0.95 for continuous on-demand hot water at one to two sinks simultaneously or one commercial sink across residential, commercial, and mobile applications.

 

Literature

Support

Support

Diagrams, Troubleshooting, and Support - Learn More

 
Product FAQ

What does the Bosch Tronic TR4000C-10 deliver at the point of use?

The Bosch Tronic TR4000C-10 delivers a continuous on-demand supply of hot water at one to two sinks simultaneously or at one commercial sink, operating at 96% efficiency with a UEF of 0.95 and no standby heat loss. Because it heats water only at the moment of use with no storage tank, there is no tank capacity limit on the duration of the hot water supply during a draw. The TR4000C-10 is the highest-kilowatt model in the Tronic 4000C series at RuralEnergy.com and is suited for installations requiring two-fixture simultaneous capacity or a single high-demand commercial sink application.

What electrical supply does the Bosch Tronic TR4000C-10 require?

The TR4000C-10 requires a dedicated 208 or 240-volt double-pole 50-amp hardwired circuit. The unit does not plug into a standard household outlet and must be hardwired by a licensed electrician at the installation location. The double-pole 50-amp breaker requirement distinguishes the TR4000C-10 from the companion TR4000C-6, which requires a double-pole 30-amp breaker, and the TR4000C-3, which requires a single-pole 30-amp breaker at 110 or 120 volts. Customers should confirm the availability of a 208 or 240-volt circuit with appropriate amperage at the installation location before ordering.

What legacy models does the Bosch Tronic TR4000C-10 replace?

The Bosch Tronic TR4000C-10 is a close functional replacement for the Powerstream Pro RP1P, the Powerstream RP1, the PowerStar AE9.5, and the Bosch Tronic 3000 US9. Customers replacing one of these legacy units must note that the cold water inlet on the TR4000C-10 is located at the bottom left and the hot water outlet is at the bottom right — a connection orientation that is reversed from the legacy models listed above. Plumbing connections must be verified and any necessary adjustments planned and executed before completing the installation.

How does the TR4000C-10 compare to the TR4000C-3 and TR4000C-6 also available at RuralEnergy.com?

All three Bosch Tronic 4000C models available at RuralEnergy.com share the same solid copper heat exchanger, tough plastic housing, 0.55 gpm minimum activation flow, and reversed connection orientation. The TR4000C-3 operates at 3.5 kW on 110 or 120 volts with a single-pole 30-amp breaker and serves one sink in warmer climates. The TR4000C-6 operates at 6.5 kW on 240 volts with a double-pole 30-amp breaker and serves one bathroom or kitchen sink. The TR4000C-10 operates at 10.5 kW on 208 or 240 volts with a double-pole 50-amp breaker and is the only model in the series rated to serve one to two sinks simultaneously or one commercial sink.

What does the power level control on the TR4000C-10 allow the user to do?

The front-mounted power level control on the TR4000C-10 allows the user to select from multiple power output settings directly on the unit, adjusting the heating intensity to suit different flow rates, incoming water temperatures, and desired output temperatures without requiring an external app, remote, or service visit. The operating indicator light on the housing provides a visual confirmation that the unit is actively heating water during a draw. These front-panel controls make field adjustment straightforward for both residential users and commercial facility maintenance personnel.

What is the warranty on the Bosch Tronic TR4000C-10?

The Bosch Tronic TR4000C-10 carries a 5-year limited warranty covering the unit against defects in materials and workmanship from the date of installation under normal use conditions. Warranty coverage requires installation and operation in accordance with the product installation instructions and applicable local electrical and plumbing codes, and must be performed by a licensed professional. The warranty is provided directly by Bosch Thermotechnology Corp. and applies to the TR4000C-10 in both residential and commercial point-of-use applications.

To top