Zoom

Duravent Stove Pipe DuraTech Tee Base Double, 5"

9371

Status: In Stock

US$24.26

Special Handling Required: Yes

Description

Description

The Duravent 9371 is a Tee Base Double, 5" from the Duravent DuraTech line, 5 inch diameter. Tee that turns the chimney from horizontal to vertical outside the wall and provides a clean out at the base.

DuraTech is Duravent's Class A all-fuel chimney system: a double wall pipe with a stainless steel inner liner and insulation for wood stoves, fireplaces, and oil or gas appliances that need a factory built chimney. Every DuraTech component is listed as part of the system, so use matching DuraTech parts throughout the run to keep the listing and the clearances valid. Check the appliance manual for the vent size and type it requires before ordering.

Rural Energy stocks the full Duravent DuraTech line, along with the stoves and heaters it vents, and ships to dealers, contractors, and homeowners.

Features

Features

DURAVENT DURATECH
Listed component of the DuraTech Class A all-fuel chimney system.

  • 5 inch diameter, fits other DuraTech components of the same size
  • Factory built and tested to the system listing
  • Use matching DuraTech parts throughout the run

IN STOCK AT RURAL ENERGY
Rural Energy keeps Duravent venting on the shelf and ships it fast.

  • Ships quickly to dealers, contractors, and homeowners
  • Help from Rural Energy support staff planning a complete vent run
  • Part of the full Duravent line we carry

Specifications

Specifications

Part Number:9371
Brand:Duravent
Product Line:DuraTech
Component:Tee Base Double, 5"
Diameter:5 inch
Use:Class A all-fuel chimney

Literature

Literature

Support

Support

 
People Also Ask:

Q. What is the DuraVent 9371 DuraTech 5-inch Double Tee Base used for?

A. The DuraVent 9371 Double Tee Base is a genuine 5-inch DuraTech chimney component used to support and connect a compatible double-tee configuration within an approved DuraTech venting system. It forms part of a listed chimney assembly and should be installed according to DuraVent instructions and applicable building codes.

Q. Is the DuraVent 9371 Double Tee Base compatible with all 5-inch chimney systems?

A. No. The DuraVent 9371 Double Tee Base is engineered specifically for 5-inch DuraTech chimney systems. It should only be used with genuine DuraTech components of the same diameter and product family to maintain proper fit, listing, and safe operation.

Q. Can the DuraVent 9371 Double Tee Base be used with wood stoves?

A. Yes. When used as part of a properly designed 5-inch DuraTech chimney system, the DuraVent 9371 Double Tee Base can be installed with compatible wood-burning appliances and other listed heating equipment approved for use with DuraTech. Always follow the appliance manufacturer's venting requirements.

Q. Is the DuraVent 9371 Double Tee Base a complete chimney installation kit?

A. No. The DuraVent 9371 is a single chimney component and is not a complete venting system. A finished installation typically requires additional DuraTech components such as chimney pipe, tee sections, supports, flashing, storm collars, termination caps, and other approved accessories.

Q. Can the DuraVent 9371 Double Tee Base be used with chimney components from another manufacturer?

A. No. DuraVent chimney components are tested and listed as complete systems. Mixing the DuraVent 9371 Double Tee Base with another manufacturer's chimney components or an incompatible DuraVent product line can affect safety, fit, certification, and code compliance.

Q. Should the DuraVent 9371 Double Tee Base be professionally installed?

A. Yes. Professional installation is recommended because chimney systems must meet manufacturer specifications, fire safety standards, and local building codes. A qualified installer can verify proper support, chimney height, clearances, and appliance compatibility.

Q. What is included with the DuraVent 9371 Double Tee Base?

A. The DuraVent 9371 package includes one genuine 5-inch DuraTech Double Tee Base. Any additional chimney sections, supports, or installation accessories required to complete the venting system are sold separately unless otherwise specified.

Q. What clearance is required around a 5-inch DuraTech chimney?

A. Standard DuraTech chimney systems with 5-inch through 8-inch diameters generally require a minimum 2-inch air clearance to combustible materials. Always follow the current DuraVent installation manual and all local building code requirements for your specific installation.

Q. What should I verify before purchasing the DuraVent 9371 Double Tee Base?

A. Verify that your chimney system is a 5-inch DuraTech installation and confirm that part 9371 appears in the approved parts list for your venting configuration. You should also verify appliance compatibility, required supports, and all associated chimney components before ordering.

Q. Why buy the DuraVent 9371 Double Tee Base from RuralEnergy.com?

A. RuralEnergy.com supplies genuine DuraVent chimney components backed by knowledgeable product support and years of experience with residential and commercial venting systems. Purchasing the DuraVent 9371 Double Tee Base from Rural Energy helps ensure authentic components, proper compatibility, and dependable assistance for your chimney installation.

To top