Duravent Stove Pipe DuraTech Tee Base Double, 6"

9471

Status: In Stock

US$26.23

Special Handling Required: Yes

Description

Description

The Duravent 9471 is a Tee Base Double, 6" from the Duravent DuraTech line, 6 inch diameter. Tee that turns the chimney from horizontal to vertical outside the wall and provides a clean out at the base.

DuraTech is Duravent's Class A all-fuel chimney system: a double wall pipe with a stainless steel inner liner and insulation for wood stoves, fireplaces, and oil or gas appliances that need a factory built chimney. Every DuraTech component is listed as part of the system, so use matching DuraTech parts throughout the run to keep the listing and the clearances valid. Check the appliance manual for the vent size and type it requires before ordering.

Rural Energy stocks the full Duravent DuraTech line, along with the stoves and heaters it vents, and ships to dealers, contractors, and homeowners.

Features

Features

DURAVENT DURATECH
Listed component of the DuraTech Class A all-fuel chimney system.

  • 6 inch diameter, fits other DuraTech components of the same size
  • Factory built and tested to the system listing
  • Use matching DuraTech parts throughout the run

IN STOCK AT RURAL ENERGY
Rural Energy keeps Duravent venting on the shelf and ships it fast.

  • Ships quickly to dealers, contractors, and homeowners
  • Help from Rural Energy support staff planning a complete vent run
  • Part of the full Duravent line we carry

Specifications

Specifications

Part Number:9471
Brand:Duravent
Product Line:DuraTech
Component:Tee Base Double, 6"
Diameter:6 inch
Use:Class A all-fuel chimney

Literature

Literature

Support

Support

 
People Also Ask:

Q. What is the DuraVent 9471 DuraTech 6-inch Double Tee Base used for?

A. The DuraVent 9471 Double Tee Base is a specialized 6-inch component used when assembling an approved DuraTech chimney configuration. It provides a connection point at the base of a compatible tee or double-tee arrangement. The exact application must follow the DuraVent system design, appliance requirements, and local building codes.

Q. Is DuraVent part 9471 compatible with 6-inch DuraTech chimney systems?

A. Yes. DuraVent part 9471 is identified as a 6-inch DuraTech tee-base component. It should be used only with the matching 6-inch DuraTech product family and other components approved for the specific chimney configuration. Do not mix it with incompatible chimney brands, diameters, or venting systems.

Q. Can the DuraVent 9471 Double Tee Base connect two heating appliances to one chimney?

A. Do not connect two heating appliances to one DuraTech chimney unless the complete installation is specifically approved by DuraVent, the appliance manufacturers, a qualified professional, and the authority having jurisdiction. Current DuraTech installation instructions generally direct installers to connect only one appliance per chimney. The name “double tee base” does not by itself confirm that a shared-flue installation is permitted.

Q. What appliances can use a 6-inch DuraTech chimney system?

A. DuraTech is an all-fuel, double-wall chimney system used with compatible wood stoves, fireplaces, furnaces, boilers, water heaters, and other approved appliances fueled by wood, oil, gas, or coal. The appliance must be listed for the chimney type and require a 6-inch flue. Always follow the appliance manufacturer's venting instructions.

Q. Is the DuraVent 9471 Double Tee Base a complete chimney tee assembly?

A. No. Part 9471 is a specific tee-base component rather than a complete chimney installation kit. A finished system may also require approved tee sections, chimney pipe, supports, caps, wall components, flashing, storm collars, and termination components. Confirm every required part against the DuraTech installation plan before ordering.

Q. Does the DuraVent 9471 Double Tee Base require professional installation?

A. Professional installation is strongly recommended because chimney design affects fire safety, draft, appliance performance, and code compliance. A qualified installer can verify the appliance connection, required supports, clearances, chimney height, and whether the proposed tee configuration is approved. Local permits and inspections may also be required.

Q. What clearance is required around a DuraTech chimney?

A. Standard 5- to 8-inch DuraTech chimney systems generally require at least 2 inches of clearance from the chimney's outer wall to combustible materials. That clearance must remain open and cannot be filled with ordinary insulation or construction materials. Follow the instructions for the exact DuraTech product series and all applicable local codes.

Q. Can DuraVent part 9471 be used with another brand of chimney pipe?

A. No. DuraVent chimney components should not be mixed with parts from another brand or an incompatible DuraVent product line. A listed chimney system is tested as a complete assembly, and substituting unapproved components can affect fit, clearances, safety, and code compliance. Use only authorized parts specified for the matching DuraTech system.

Q. What should I verify before ordering the DuraVent 9471 Double Tee Base?

A. Verify the DuraTech product series, 6-inch chimney diameter, appliance flue size, required tee configuration, fuel type, and all related support components before ordering. You should also confirm that part 9471 appears in the approved installation design or parts list. Product names alone are not enough to establish compatibility for a safety-critical chimney component.

Q. Why buy the DuraVent 9471 Double Tee Base from RuralEnergy.com?

A. RuralEnergy.com supplies DuraVent venting components backed by knowledgeable support for heating and chimney applications. The Rural Energy team can help customers review part numbers, system compatibility, and related components before purchase. That guidance is especially valuable when selecting specialized chimney parts such as the DuraVent 9471 DuraTech 6-inch Double Tee Base.

To top