Imperial Stove Pipe Black 6" x 24"

A. The Imperial BM0111 Stove Pipe Black 6" x 24" is designed for use as a single-wall connector pipe between a compatible solid-fuel appliance and chimney system.

Its 6-inch diameter fits appliances and venting components that specify a 6-inch flue connection. The 24-gauge steel construction provides durability for residential stove installations, while the black matte finish creates a clean appearance in exposed indoor applications.

This pipe is not a chimney and should not pass through walls, ceilings, attics, closets, or other concealed spaces. Always follow the appliance manufacturer’s instructions and applicable local building codes.

A. The Imperial BM0111 is compatible with approved solid-fuel appliances that require a 6-inch single-wall connector pipe.

Compatibility depends on the appliance’s flue-collar size, fuel type, installation instructions, and the chimney connection. It is commonly used with wood stoves, but the appliance manufacturer must specifically permit single-wall stove pipe.

Do not reduce or increase the flue diameter unless the appliance manufacturer and local code allow it. A qualified installer can confirm that the stove, connector pipe, adapters, and chimney form a complete approved system.

A. The Imperial BM0111 single-wall stove pipe requires at least 18 inches of clearance from combustible materials.

Combustible materials may include wood framing, paneling, furniture, drywall with wood framing, and other surfaces that can ignite when exposed to heat. The full clearance must be maintained around the connector pipe unless an approved reduction method is installed.

Do not assume that a noncombustible surface automatically removes the clearance requirement because combustible framing may be located behind it. Follow the appliance instructions, chimney requirements, and local code when planning the installation.

A. The Imperial BM0111 has an approximate installed length of 22¾ inches after accounting for the required overlap.

Rural Energy specifies subtracting 1¼ inches from the listed 24-inch length when calculating the installed length. This overlap helps create a secure connection between adjoining stove-pipe components.

Measure the complete connector route before ordering. Elbows, adapters, telescoping sections, and the appliance flue collar can change the total length required.

A. The Imperial BM0111 uses 24-gauge single-wall steel for durable performance in an approved stove-connector installation.

Its black matte painted finish is designed to resist scratching and chipping during normal handling and use. Proper installation, adequate clearances, dry storage, and regular inspection help extend the pipe’s service life.

The pipe should be replaced if it develops heavy corrosion, holes, loose seams, warping, or other damage. Stove pipe is a safety-critical component and should be inspected as part of routine stove and chimney maintenance.

A. The Imperial BM0111 uses a snap-lock design