Osburn Brushed Nickel Door Overlay, Stratford

Yes. A door overlay — either the OA10610 black or OA10612 brushed nickel — is a required component of the Osburn Stratford II wood fireplace installation. The Stratford II is supplied without a door overlay as standard and requires the owner to select one of the two available finish options at purchase to complete the door assembly configuration. The door overlay must be installed before the fireplace is put into service.

The OA10610 and OA10612 are both cast iron door overlays for the Osburn Stratford II and are identical in form, function, and installation. The only difference is the finish — the OA10610 is the black cast iron overlay that provides a traditional fireplace appearance, while the OA10612 is the brushed nickel overlay that provides a more contemporary and sleek appearance. The choice between the two is a visual and design preference — the black overlay suits more traditional décor while the brushed nickel overlay coordinates better with contemporary interiors and modern design aesthetics.

The Osburn Stratford II is a non-catalytic EPA-certified zero-clearance wood fireplace with a 2.5 cubic foot firebox accessible through double cast iron doors. It delivers a maximum heat output of 80,000 BTU per hour with a recommended heating area of 750 to 2,200 square feet. A 176 CFM blower is included. Both a faceplate — available in traditional OA10251 or modern OA10252 styles — and a door overlay are required accessories to complete the installation. Optional accessories include a fire screen door, 4-inch fresh air intake components, and forced air distribution kits for heating adjacent rooms.

In addition to the OA10612 brushed nickel door overlay, the Stratford II installation requires a faceplate — available as the OA10251 traditional faceplate or the OA10252 modern faceplate — to cover the transition between the zero-clearance fireplace box and the surrounding wall opening. Both the door overlay and faceplate must be selected and installed to complete the Stratford II as a finished installation. The fire screen door AC01275 is available as an optional accessory for open-door burning operation, and 4-inch fresh air intake components are available for installations requiring a dedicated outside combustion air supply.

Brushed nickel cast iron surfaces should be cleaned only with a soft clean damp cloth when the fireplace is fully cooled to ambient temperature. Abrasive cleaners, scouring pads, and any cleaning products with abrasive properties must not be used on brushed nickel cast iron surfaces, as these will scratch or permanently damage the finish. The door overlay must never be cleaned while the fireplace retains heat from recent operation, as contact with heated cast iron components poses a severe burn hazard. Maintaining the brushed nickel finish at its original quality requires avoiding all chemical or abrasive contact during cleaning throughout the appliance's service life.

The Stratford II parts diagram lists the SE24276-01 left door with handle and gasket assembly and the SE24277-01 right door with handle and gasket assembly as the primary door components, reflecting the Stratford II's double cast iron door configuration. The AC01275 fire screen door is available as an optional accessory. The SE72084 replacement handle with latch kit provides replacement handle and latch hardware. The AC09185 door latch kit provides replacement latch hardware. The 40030 round 1/4-inch rope with adhesive provides door gasket rope material, and the SE53241 replacement glass with gasket measuring 13-1/2 inches by 12-3/16 inches provides the replacement viewing glass for the door panels.