Customize your Osburn 2000 Wood Insert

Elevate your home heating experience with the 2000 Wood Insert by Osburn Manufacturing. This impressive fireplace insert combines advanced technology, exceptional performance, and timeless design to provide you with efficient and stylish warmth. Designed to fit seamlessly into your existing fireplace, the 2000 Wood Insert brings new life to your space while offering superior heating capabilities.

With its large glass viewing area, the 2000 Wood Insert offers a captivating display of dancing flames that will mesmerize you and your guests. Enjoy the cozy ambiance and comforting warmth as this insert efficiently heats your home. Its innovative combustion system ensures optimal heat output while minimizing fuel consumption, making it an environmentally conscious and cost-effective heating solution.

Crafted with meticulous attention to detail, the 2000 Wood Insert showcases a sleek and modern design that complements any décor. Its clean lines, customizable trim options, and premium finishes allow you to personalize the insert to match your style and enhance the aesthetic appeal of your room. Experience the perfect combination of functionality and elegance with this beautifully crafted fireplace insert.

Installation of the 2000 Wood Insert is straightforward, thanks to its adaptable design and flexible venting options. With precise controls for adjusting heat output, you have full control over the temperature and comfort of your living space. Say goodbye to drafty fireplaces and embrace the efficient warmth and contemporary style of the 2000 Wood Insert by Osburn Manufacturing. Upgrade your fireplace and create a cozy sanctuary where lasting memories are made.

A Tax Credit is available for this product!

• Fuel type: Dry Cordwood
• Recommended heating area (sq. ft.): 500-2,100
• Firebox volume (cu. ft.): 2.4
• Maximum burn time: 8h
• Maximum heat output (dry cordwood): 75,000 BTU/h (22.0 kW)
• Overall heat output rate (min. to max): 14,800 BTU/h (4.34 kW) to 28,600 BTU/h (8.38 kW)
• Average overall efficiency (EPA cribs / Douglas fir): N.A (HHV) N.A (LHV)
• Average overall efficiency (dry cordwood): 69% (HHV) 74% (LHV)
• Optimum efficiency: 77%
• Average particulate emissions rate: 1.54 g/h
• Average CO: 89.4 g/h

Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

(Average overall efficiency) As measured per CSA B415.1-10 stack loss method.

(HHV) Higher Heating Value of the fuel.

(LHV) Lower Heating Value of the fuel.

Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

Optimum overall efficiency at a specific burn rate (LHV).

This appliance is officially tested and certified by an independent agency.

Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)

                                                                                                                       Canada   USA

* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

Brochure Osburn 2000 Wood Insert

Osburn Catalog