Zoom

Duravent Stove Pipe DuraTech Chase Top Flashing, 6"

6DT-CTF

Status: In Stock

US$67.99

Description

Description

The Duravent 6DT-CTF is a Chase Top Flashing, 6" from the Duravent DuraTech line, 6 inch diameter. Chase top flashing that closes the top of a framed chimney chase around the pipe.

DuraTech is Duravent's Class A all-fuel chimney system: a double wall pipe with a stainless steel inner liner and insulation for wood stoves, fireplaces, and oil or gas appliances that need a factory built chimney. Every DuraTech component is listed as part of the system, so use matching DuraTech parts throughout the run to keep the listing and the clearances valid. Check the appliance manual for the vent size and type it requires before ordering.

Rural Energy stocks the full Duravent DuraTech line, along with the stoves and heaters it vents, and ships to dealers, contractors, and homeowners.

Features

Features

DURAVENT DURATECH
Listed component of the DuraTech Class A all-fuel chimney system.

  • 6 inch diameter, fits other DuraTech components of the same size
  • Factory built and tested to the system listing
  • Use matching DuraTech parts throughout the run

IN STOCK AT RURAL ENERGY
Rural Energy keeps Duravent venting on the shelf and ships it fast.

  • Ships quickly to dealers, contractors, and homeowners
  • Help from Rural Energy support staff planning a complete vent run
  • Part of the full Duravent line we carry

Specifications

Specifications

Part Number:6DT-CTF
Brand:Duravent
Product Line:DuraTech
Component:Chase Top Flashing, 6"
Diameter:6 inch
Use:Class A all-fuel chimney

Literature

Literature

Support

Support

 
People Also Ask:

Q. What is the DuraVent 6DT-CTF Chase Top Flashing used for?

A. The DuraVent 6DT-CTF Chase Top Flashing is a genuine termination component designed for compatible 6-inch DuraTech chimney systems. It seals the top of a framed chimney chase while providing a properly sized opening for the chimney to pass through, helping protect the chase from water intrusion.

Q. Why is a chase top flashing important for a chimney installation?

A. A chase top flashing covers and seals the top of a chimney chase to help prevent rain, snow, and debris from entering the enclosed chase. It also provides a clean, finished appearance while supporting proper chimney termination.

Q. Which chimney systems are compatible with the DuraVent 6DT-CTF Chase Top Flashing?

A. The DuraVent 6DT-CTF is designed specifically for compatible 6-inch DuraTech chimney systems. Always verify your chimney diameter and system compatibility before purchasing installation components.

Q. Does the DuraVent 6DT-CTF Chase Top Flashing improve chimney draft?

A. No. The DuraVent 6DT-CTF is a weatherproofing and finishing component. It helps protect the chimney chase from moisture but does not affect chimney draft or heating appliance performance.

Q. Can the DuraVent 6DT-CTF Chase Top Flashing be used with another manufacturer's chimney system?

A. No. The DuraVent 6DT-CTF is engineered specifically for compatible DuraVent DuraTech chimney systems. Mixing components from different manufacturers may affect fit, weather sealing, safety, and certification compliance.

Q. Should the DuraVent 6DT-CTF Chase Top Flashing be professionally installed?

A. Yes. Professional installation is recommended to ensure proper sealing of the chase, correct chimney alignment, and compliance with DuraVent installation instructions and local building codes.

Q. What is included with the DuraVent 6DT-CTF Chase Top Flashing?

A. The package includes one genuine DuraVent 6DT-CTF Chase Top Flashing. Chimney pipe sections, chimney caps, storm collars, support components, and additional installation accessories are sold separately unless otherwise specified.

Q. Where is the DuraVent 6DT-CTF Chase Top Flashing installed?

A. The DuraVent 6DT-CTF is installed at the top of a framed chimney chase. It covers the chase opening while allowing the compatible DuraTech chimney to extend safely through the top for proper termination.

Q. What should I verify before purchasing the DuraVent 6DT-CTF Chase Top Flashing?

A. Before purchasing, verify your chimney diameter, confirm your installation uses a compatible 6-inch DuraTech chimney system, and ensure the chase dimensions match the flashing requirements specified by DuraVent.

Q. Why buy the DuraVent 6DT-CTF Chase Top Flashing from RuralEnergy.com?

A. RuralEnergy.com supplies genuine DuraVent chimney components backed by knowledgeable technical support and decades of experience in residential heating systems. Purchasing the DuraVent 6DT-CTF Chase Top Flashing from Rural Energy helps ensure authentic products, verified compatibility, and dependable customer service.

To top