Duravent Stove Pipe DuraTech DSA Roof Flashing, 0/12-6/12

6DT-F6DSA

Status: In Stock

US$148.99

Special Handling Required: Yes

Description

Description

The Duravent 6DT-F6DSA is a DSA Roof Flashing, 0/12-6/12 from the Duravent DuraTech line, 6 inch diameter. Roof flashing that seals the pipe where it passes through the roof. Choose the flashing that matches your roof pitch.

DuraTech is Duravent's Class A all-fuel chimney system: a double wall pipe with a stainless steel inner liner and insulation for wood stoves, fireplaces, and oil or gas appliances that need a factory built chimney. Every DuraTech component is listed as part of the system, so use matching DuraTech parts throughout the run to keep the listing and the clearances valid. Check the appliance manual for the vent size and type it requires before ordering.

Rural Energy stocks the full Duravent DuraTech line, along with the stoves and heaters it vents, and ships to dealers, contractors, and homeowners.

Features

Features

DURAVENT DURATECH
Listed component of the DuraTech Class A all-fuel chimney system.

  • 6 inch diameter, fits other DuraTech components of the same size
  • Factory built and tested to the system listing
  • Use matching DuraTech parts throughout the run

IN STOCK AT RURAL ENERGY
Rural Energy keeps Duravent venting on the shelf and ships it fast.

  • Ships quickly to dealers, contractors, and homeowners
  • Help from Rural Energy support staff planning a complete vent run
  • Part of the full Duravent line we carry

Specifications

Specifications

Part Number:6DT-F6DSA
Brand:Duravent
Product Line:DuraTech
Component:DSA Roof Flashing, 0/12-6/12
Diameter:6 inch
Use:Class A all-fuel chimney

Literature

Literature

Support

Support

 
People Also Ask:

Q. What is the DuraVent 6DT-F6DSA DSA Roof Flashing used for?

A. The DuraVent 6DT-F6DSA DSA Roof Flashing is a genuine flashing component designed for compatible 6-inch DuraTech chimney systems. It creates a weather-resistant seal where the chimney passes through the roof on roof pitches from 0/12 to 6/12, helping protect the roof from water intrusion.

Q. Which roof pitches are compatible with the DuraVent 6DT-F6DSA Roof Flashing?

A. The DuraVent 6DT-F6DSA is designed for roof installations with pitches ranging from 0/12 through 6/12. Selecting the correct flashing for your roof slope helps ensure proper weather protection and a professional installation.

Q. Why is roof flashing important for a chimney installation?

A. Roof flashing helps create a watertight seal where the chimney penetrates the roof. Proper flashing minimizes the risk of leaks and helps protect both the roofing system and the chimney installation from moisture damage.

Q. Which chimney systems are compatible with the DuraVent 6DT-F6DSA?

A. The DuraVent 6DT-F6DSA is designed specifically for compatible 6-inch DuraTech chimney systems. Always verify chimney diameter, roof pitch, and installation requirements before purchasing.

Q. Can the DuraVent 6DT-F6DSA Roof Flashing be used with another manufacturer's chimney system?

A. No. The DuraVent 6DT-F6DSA is engineered specifically for compatible DuraVent DuraTech chimney systems. Mixing venting components from different manufacturers may affect fit, weather sealing, safety, and certification compliance.

Q. Should the DuraVent 6DT-F6DSA Roof Flashing be professionally installed?

A. Yes. Professional installation is recommended to ensure correct flashing placement, proper roof sealing, and compliance with DuraVent installation instructions and local building codes.

Q. What is included with the DuraVent 6DT-F6DSA Roof Flashing?

A. The package includes one genuine DuraVent 6DT-F6DSA DSA Roof Flashing. Storm collars, chimney pipe sections, chimney caps, support components, and other installation accessories are sold separately unless otherwise specified.

Q. Where is the DuraVent 6DT-F6DSA Roof Flashing installed?

A. The DuraVent 6DT-F6DSA is installed where a compatible DuraTech chimney passes through the roof. It works together with a compatible storm collar to help create a weather-resistant seal around the chimney penetration.

Q. What should I verify before purchasing the DuraVent 6DT-F6DSA Roof Flashing?

A. Before purchasing, verify your chimney diameter, roof pitch, roofing material, and confirm your installation uses a compatible 6-inch DuraTech chimney system. Always consult the DuraVent installation manual to select the proper flashing for your application.

Q. Why buy the DuraVent 6DT-F6DSA Roof Flashing from RuralEnergy.com?

A. RuralEnergy.com supplies genuine DuraVent chimney components backed by knowledgeable technical support and decades of experience in residential heating systems. Purchasing the DuraVent 6DT-F6DSA Roof Flashing from Rural Energy helps ensure authentic products, verified compatibility, and dependable customer service.

To top