Zoom

Duravent Stove Pipe DVL Elbow 90 Degree, 6"

6DVL-E90

Status: In Stock

US$146.99

Description

Description

The Duravent 6DVL-E90 is a Elbow 90 Degree, 6" from the Duravent DVL line, 6 inch diameter. Elbow for turning the pipe run. Use pairs of elbows to offset around obstructions.

DVL is Duravent's double wall black stove pipe connector. The stainless steel inner wall and air gap cut the clearance to combustibles to 6 inches, which lets the stove sit closer to the wall than single wall pipe allows. Every DVL component is listed as part of the system, so use matching DVL parts throughout the run to keep the listing and the clearances valid. Check the appliance manual for the vent size and type it requires before ordering.

Rural Energy stocks the full Duravent DVL line, along with the stoves and heaters it vents, and ships to dealers, contractors, and homeowners.

Features

Features

DURAVENT DVL
Listed component of the DVL double wall black stove pipe system.

  • 6 inch diameter, fits other DVL components of the same size
  • Factory built and tested to the system listing
  • Use matching DVL parts throughout the run

IN STOCK AT RURAL ENERGY
Rural Energy keeps Duravent venting on the shelf and ships it fast.

  • Ships quickly to dealers, contractors, and homeowners
  • Help from Rural Energy support staff planning a complete vent run
  • Part of the full Duravent line we carry

Specifications

Specifications

Part Number:6DVL-E90
Brand:Duravent
Product Line:DVL
Component:Elbow 90 Degree, 6"
Diameter:6 inch
Use:double wall black stove pipe

Literature

Literature

Support

Support

 
People Also Ask:

Q. What is the DuraVent 6DVL-E90 90° Elbow used for?

A. The DuraVent 6DVL-E90 is a genuine 6-inch DVL double-wall 90-degree elbow designed to change the direction of a DVL stove pipe connector system. It allows installers to route the connector pipe around structural obstacles while maintaining compatibility with approved DuraVent venting systems.

Q. Which heating appliances are compatible with the DuraVent 6DVL-E90 Elbow?

A. The DuraVent 6DVL-E90 is designed for use with compatible 6-inch DVL double-wall connector pipe serving approved wood-burning stoves and other listed solid-fuel appliances. Always verify compatibility with both your appliance and venting system before installation.

Q. Can the DuraVent 6DVL-E90 be used as a chimney?

A. No. The DuraVent 6DVL-E90 is a connector pipe fitting and not a factory-built chimney. It is intended to be installed between the appliance and a listed chimney system as part of a complete DVL connector pipe installation.

Q. What are the advantages of using a DVL double-wall 90-degree elbow?

A. A DVL double-wall elbow allows the vent connector to change direction while helping maintain higher flue gas temperatures than many single-wall connector systems. This promotes stronger draft, reduces creosote formation, and supports reduced clearances to combustible materials when installed according to DuraVent specifications.

Q. Can the DuraVent 6DVL-E90 be connected to another manufacturer's stove pipe?

A. No. The DuraVent 6DVL-E90 is engineered specifically for the DVL double-wall stove pipe system. Mixing connector pipe components from different manufacturers or incompatible product lines may affect fit, safety, and system certification.

Q. Should the DuraVent 6DVL-E90 be professionally installed?

A. Yes. Professional installation is recommended to ensure the connector pipe layout, clearances, appliance compatibility, and venting configuration comply with DuraVent installation instructions and local building codes.

Q. What is included with the DuraVent 6DVL-E90?

A. The package includes one genuine DuraVent 6-inch DVL 90-degree elbow. Additional connector pipe sections, adapters, chimney components, support hardware, and installation accessories required for a complete venting system are sold separately unless otherwise specified.

Q. Does the DuraVent 6DVL-E90 maintain the reduced clearances of the DVL system?

A. Yes. When installed as part of a complete DVL double-wall connector pipe system and in accordance with DuraVent installation instructions, the 6DVL-E90 maintains the clearance characteristics of the listed DVL system.

Q. What should I verify before purchasing the DuraVent 6DVL-E90 Elbow?

A. Before purchasing, verify your appliance's flue collar diameter, confirm that your connector pipe system uses 6-inch DVL components, and ensure that a 90-degree elbow is appropriate for your venting layout. Always follow the appliance manufacturer's venting requirements.

Q. Why buy the DuraVent 6DVL-E90 90-degree Elbow from RuralEnergy.com?

A. RuralEnergy.com supplies genuine DuraVent venting components backed by knowledgeable technical support and decades of experience in residential heating systems. Purchasing the DuraVent 6DVL-E90 DVL 90-degree Elbow from Rural Energy helps ensure authentic components, verified compatibility, and dependable customer service.

Customers who bought this item also bought

To top