Bosch 940 ES NG Tankless Water Heater

7703311075

Status: In Stock

was US$4,174.00

now US$1,188.00

Description

Description

 

The Bosch Therm 940 ES Tankless Water Heater, part number 7703311075, is a whole-house indoor natural gas non-condensing tankless water heater designed to deliver continuous on-demand hot water for high-demand residential and commercial applications without the standby energy losses associated with traditional storage tank water heaters.

The Therm 940 ES is the highest-capacity non-condensing model in the Bosch Therm series, operating at a 199,000 BTU/Hr maximum input with electronic ignition and sealed combustion dual-fan technology that draws combustion air from outside the structure. The unit achieves an Energy Factor of 0.82 at 82% thermal efficiency, carries an Energy Star rating, and incorporates ultra-low NOx certified burner technology along with built-in freeze protection and an externally accessible water filter for routine maintenance without requiring panel removal.

Not only does the Bosch Them 940 ES provide instantaneous hot water, but it also offers impressive energy efficiency. By only heating water as needed, this unit helps you save on energy consumption and reduces utility bills. The advanced technology and intelligent controls ensure optimal performance while minimizing energy wastage.

Reliability is at the core of the Bosch Them 940 ES tankless water heater. Built with durability and longevity in mind, it is engineered to withstand the demands of everyday use. Rest assured knowing that you have a dependable hot water solution that will serve you and your family for years to come.

Experience the efficiency, reliability, and endless hot water capabilities of the Bosch Them 940 ES tankless water heater. Upgrade your home with this premium water heating solution and enjoy the luxury of instant hot water on demand. Discover a new level of comfort and convenience with Bosch.

What's Included: Bosch Therm 940 ES NG tankless water heater unit, wall mounting hardware, and installation hardware pack. Venting components are not included and must be purchased separately. A pressure relief valve is not included and must be sourced and installed separately per local code requirements.

Installation Limits: The Therm 940 ES NG requires a natural gas supply and is not compatible with liquid propane without conversion. The unit requires indoor installation and must be connected to a properly sized natural gas supply line meeting minimum inlet pressure requirements. Stainless steel venting of either 3-inch or 4-inch diameter is required and may be routed through a side wall or vertically through the roof. A 120-volt electrical connection is required for electronic ignition and control board operation. A pressure relief valve must be installed separately and is not included with the unit.

Compatibility: The Bosch Therm 940 ES NG (part number 7703311075) is one of four Bosch tankless gas water heater models available at RuralEnergy.com. The companion models in the current RuralEnergy.com Bosch gas tankless lineup are the Therm 830 ES Natural Gas, the Therm 830 ES Liquid Propane, and the Therm 940 ES Liquid Propane. The Bosch TSTAT2 ProTankless Wireless Remote is a compatible accessory for this unit, also available at RuralEnergy.com.

Features

Features

  • Highest capacity non-condensing model
  • 83%+ thermal efficiency
  • 199,000 BTU maximum input
  • 9.4 gallons per minute capacity at 35F degree rise
  • Minimum activation flow rate of 0.5 gallons per minute
  • Electronic ignition and patented burner design
  • Exclusive safety and precision controls
  • Vents vertically or horizontally with 3” or 4” stainless steel
  • Can be used in solar thermal, recirculation applications
  • Built for durability and serviceability with 15-year warranty and 20+ year life expectancy
  • Available in NG and LP models
  • Also available as an outdoor model, 940 EFO
  • Mobile home certified

Specifications

Specifications

Brand: Bosch
Part Number: 7703311075
Model: Therm 940 ES NG
Condensing / Non-Condensing: Non-Condensing
Application: Residential or Commercial
Fuel Type: Natural Gas
Max Input: 199,000 BTU/Hr
Min Input: 19,900 BTU/Hr
Capacity at 35°F Rise: 9.4 gpm
Capacity at 55°F Rise: 6.0 gpm
Intelligent Cascading: Yes
Min Flow Rate: 0.50 gpm
Temperature Range: 100 – 140°F
Temperature Stability: +/- 2°F
Default Temperature: 122°F
Energy Factor: 0.83
Thermal Efficiency: 83%
Energy Star Rated: Yes
NOx Certification: Ultra-Low NOx Certified
Installation Options: Indoor or Outdoor (outdoor kit required for outdoor installation)
Dimensions (W x H x D): 17 7/8" x 30½" x 11¼"
Weight: 67 lbs.
Inlet Connection: ¾" NPT
Outlet Connection: ¾" NPT
Gas Connection: ¾" NPT
Min NG Pressure: 3.5" WC
Max Water Pressure: 150 psi
Min Water Pressure: 30 psi
Venting Options: Stainless Steel
Max Vent Run: 61¼ ft.
Condensing Heat Exchanger: N/A
Freeze Protection: Built-in
Water Filter: Externally accessible
Electrical Requirement: 120V AC
Pressure Relief Valve: Not included — must be sourced and installed separately

 

The Bosch Therm 940 ES NG is the highest-capacity non-condensing model in the Bosch Therm series available at RuralEnergy.com, suited for whole-house residential and light commercial natural gas tankless hot water applications requiring maximum on-demand output at 9.4 gpm at a 35°F rise and 6.0 gpm at a 55°F rise.

 

Literature

Support

Support

Diagrams, Troubleshooting, and Support - Learn More

 
Product FAQ

What fuel type does the Bosch Therm 940 ES part number 7703311075 require?

The Bosch Therm 940 ES part number 7703311075 is configured exclusively for natural gas fuel and requires a minimum inlet gas pressure of 3.5 inches water column. It is not compatible with liquid propane without a conversion process. Customers requiring a liquid propane configuration should select the Bosch Therm 940 ES LP model, also available at RuralEnergy.com. Both models share the same Therm 940 ES platform and feature set but are factory-configured for their respective fuel types.

What hot water flow rates does the Bosch Therm 940 ES NG deliver?

The Therm 940 ES NG delivers 9.4 gallons per minute at a 35°F temperature rise and 6.0 gallons per minute at a 55°F temperature rise. The minimum activation flow rate is 0.50 gallons per minute. These flow rates represent the highest output capacity among the four Bosch gas tankless water heater models currently available at RuralEnergy.com, making the 940 ES NG the preferred choice for larger households or installations with simultaneous multi-fixture hot water demand.

Can the Bosch Therm 940 ES NG be installed outdoors?

The Therm 940 ES NG supports both indoor and outdoor installation configurations. Outdoor installation requires a separately purchased outdoor installation kit, which is not included with the unit. Indoor installation uses stainless steel venting with a maximum total vent run of 61¼ feet. The specific installation configuration — indoor or outdoor — should be determined prior to ordering to ensure the appropriate venting or outdoor kit components are sourced before installation begins.

What temperature range and stability does the Bosch Therm 940 ES NG maintain?

The Therm 940 ES NG operates across a temperature range of 100 to 140°F with a factory default temperature setting of 122°F. The unit maintains output temperature stability within plus or minus 2°F of the set point across varying demand conditions. The temperature setting can be adjusted within that range at the control panel or wirelessly using the compatible Bosch TSTAT2 ProTankless Wireless Remote, available separately at RuralEnergy.com.

What maintenance features does the Bosch Therm 940 ES NG include?

The Therm 940 ES NG includes an externally accessible water filter that can be removed and cleaned during routine maintenance without opening the control panel or disrupting internal components. The unit also includes built-in freeze protection to guard against damage during cold-weather periods when the heater may not be in active use. Together these features reduce the frequency and complexity of service visits required over the life of the installation.

Does the Bosch Therm 940 ES NG include a pressure relief valve?

The Bosch Therm 940 ES NG does not include a pressure relief valve. A pressure relief valve must be sourced and installed separately as part of the installation. Local plumbing codes typically require a pressure relief valve on all water heating equipment, and the installer or licensed plumber completing the installation is responsible for selecting and fitting the appropriate valve for the specific application and jurisdiction. The unit supports water supply pressure between 30 and 150 psi.

Customers who bought this item also bought

To top