Osburn Equiss Freestanding Log Holder

The Equiss log holder consists of two steel panels that assemble by being intersected — each panel has a slot cut partway through its width, and the two panels are slid together through their respective slots to lock in position and form the complete X-shaped base that holds the firewood stack upright. No tools, screws, or fasteners are required at any point during assembly or disassembly. The assembly takes only seconds and produces a stable, robust holder ready to be loaded with firewood. At the end of the heating season the holder disassembles just as quickly by separating the two panels, which then lie flat for compact off-season storage.

The cuttable rubber band is designed to be attached around the base of the assembled log holder to provide two functions. First, it protects the floor surface beneath the holder from scratches and marks that the bare steel base edges could otherwise cause, particularly on hardwood, tile, or other finished floor surfaces. Second, it gives the completed installation a cleaner and more finished appearance at the base of the holder. The rubber band is cuttable so it can be trimmed to exactly the length required to fit the perimeter of the assembled holder base.

The Equiss log holder measures 24-1/4 inches wide and 13 inches deep when assembled, with a height of 15-1/4 inches. This compact footprint accommodates a stack of firewood suitable for convenient hearth-side storage of a short-term supply of logs for reloading the stove — typically enough firewood for several burns. The holder is not intended as a primary firewood storage solution for large quantities of wood, but rather as a practical and attractive fireside holder that keeps a convenient working supply of seasoned firewood organised and accessible at the stove without requiring trips to an outdoor wood storage area for every reload.

No. The Equiss log holder is designed for indoor use only and is not intended for outdoor installation. Exposing the steel holder to outdoor weather conditions — including rain, snow, humidity, and freeze-thaw cycling — can cause corrosion and damage to the steel components and the rubber base band over time. The holder is designed to be positioned indoors at the hearth next to the wood stove or fireplace where firewood will be loaded from it, providing an attractive and functional fireside storage solution within the home's interior.

Yes. The AC02350 Equiss log holder is a universal fireside accessory that is listed as a recommended optional accessory across multiple Osburn wood stove and insert product pages, including the Osburn 1700 wood stove, Osburn Inspire insert, and many other Osburn models. As a freestanding log storage holder, its function and compatibility are not dependent on the specific stove or insert model it is positioned alongside — it is suitable for use next to any wood-burning heating appliance installation where convenient fireside log storage is desired.

For owners requiring greater firewood storage capacity than the compact Equiss log holder provides, Osburn also offers the AC02351 48-inch Wood Storage with Finishing Trim as a larger wood storage solution. The AC02351 is a heavy-steel powder-coated wood storage unit that can be configured as built-in or freestanding and positioned either vertically or horizontally, accommodating logs up to 18 inches in length. An optional accessories storage drawer for the AC02351 is also available as AC02353. Both the Equiss log holder AC02350 and the AC02351 wood storage unit are listed as recommended accessories across the Osburn stove and insert product range.