Osburn 48" Wood Storage with Finishing Trim

The AC02351 offers three primary configuration options. In freestanding vertical orientation it functions as a traditional fireside log storage box positioned next to the wood stove or fireplace. In freestanding horizontal orientation the unit can serve as a seating bench at an entrance or hallway while also providing firewood storage — a practical dual-purpose configuration for entry areas. In the built-in orientation the storage box is recessed into a wall cavity and the included finishing trim frames the opening for a seamless minimalist appearance that integrates the firewood storage into the wall structure itself. All three configurations are supported by the assembly and installation instructions in the AC02351 owner's manual.

The finishing trim is designed for use when the AC02351 is installed in a wall built-in configuration. When the storage box is recessed into a wall cavity, the finishing trim frames the opening at the wall face, covering the transition between the steel storage box and the surrounding wall surface materials and providing the seamless, flawless appearance of a purpose-built architectural feature rather than a surface-mounted or applied accessory. For freestanding configurations, the finishing trim may be used to provide a decorative edge detail around the open face of the storage box, though its primary function is the built-in wall installation application.

The AC02353 is an optional accessories storage drawer measuring 17 inches by 15 inches by 6 inches that is available separately and is designed to be fitted into the AC02351 wood storage unit as a concealed storage compartment for fireplace tools. The drawer includes a poker and shovel, providing a dedicated storage location for the tools that would otherwise need to be stored separately near the hearth. The drawer slides into the storage unit beneath the firewood box, keeping the tools conveniently accessible at the hearth while concealing them within the storage unit structure for a clean and organised appearance.

The four concealed wooden blocks built into the steel frame base of the AC02351 serve as protective feet that keep the steel frame slightly above the floor surface and prevent the bare steel edges or corners of the base from making direct contact with the floor. Direct contact between heavy steel and finished floor surfaces such as hardwood, engineered wood, tile, or stone under the weight of a loaded firewood storage unit can cause scratches, dents, or other floor damage over time. The wooden blocks distribute the load across a slightly larger footprint and provide a softer contact surface that protects the floor from premature wear.

Yes. The AC02351 is a universal fireside and home storage accessory that is listed as a recommended optional accessory across multiple Osburn wood stove, insert, and fireplace product pages, including the Osburn 1700 and 950 wood stoves, Osburn Inspire insert, Osburn Horizon fireplace, Osburn Stratford II fireplace, and others. As a firewood storage unit, its function and compatibility are not dependent on the specific heating appliance model it is positioned alongside — it is suitable for use next to any Osburn or other wood-burning heating appliance installation where attractive and practical firewood storage is desired.

When the AC02351 is installed in a wall built-in configuration, all installation must comply with applicable local building codes and all clearance requirements for combustible material storage adjacent to heating appliances. The wall recess must be framed and finished appropriately to support the steel storage box and the finishing trim. All built-in installation must follow the instructions in the AC02351 owner's manual, which provides the required wall cavity dimensions, framing requirements, and finishing trim installation procedure. Consulting a qualified installer or contractor is recommended when undertaking the wall built-in configuration to ensure the installation meets all applicable requirements.