Rinnai Direct Vent Furnance (Thermostat Ready) LP (White)

EX22CWT-P

Status: In Stock

was US$3,322.00

now US$2,491.50

Description

Description

*Available in BC location only

Rinnai EX22CWT-P Direct Vent Wall Furnace – Propane Gas Heating

The Rinnai EX22CWT-P Direct Vent Wall Furnace is a high-capacity, wall-mounted propane heater designed to provide reliable, efficient warmth in larger living spaces, cabins, workshops, garages, and zone-heating applications. Built for consistent performance, this model delivers steady comfort while making efficient use of propane fuel.

As a sealed direct vent system, the EX22CWT-P draws combustion air from outside and vents exhaust gases outdoors, helping maintain indoor air quality and improve overall safety. This design is well suited for tight homes and cold-climate installations where dependable, clean-burning heat is essential.

The furnace uses modulating operation to adjust heat output based on demand, reducing temperature swings and avoiding unnecessary fuel use. Thermostat control allows for straightforward temperature management, while the compact, wall-mounted design eliminates the need for ductwork and supports flexible installation in both retrofit and new applications.

Designed for long service life and dependable operation, the Rinnai EX22CWT-P Direct Vent Wall Furnace is a strong choice for primary or supplemental heating in residential and light commercial settings where higher output, propane efficiency, and space-saving installation are important.

Features

Features

COMPACT AND EFFICIENT ZONE HEATING
The Rinnai EX22CWT-P is engineered to provide reliable, efficient zone heating using a sealed direct vent design that helps maintain indoor air quality.

  • Direct vent, sealed-combustion system separates indoor air from combustion process
  • Designed to deliver consistent heat output for small to mid-sized rooms
  • Efficient operation helps reduce fuel consumption compared to non-sealed heaters

THERMOSTAT-READY COMFORT CONTROL
The EX22CWT-P is thermostat-ready, allowing precise temperature control when paired with a compatible wall thermostat.

  • Supports external wall thermostat for accurate temperature regulation
  • Automatically cycles burner output to maintain set temperature
  • Improves comfort by minimizing temperature swings

SAFE, CLEAN DIRECT VENT OPERATION
Rinnai’s direct vent technology ensures combustion air is drawn from outside and exhaust gases are safely vented outdoors.

  • Sealed combustion chamber enhances indoor safety
  • Reduces risk of indoor air contamination
  • Quiet operation suitable for living spaces

SPACE-SAVING WALL-MOUNT DESIGN
The slim, wall-mounted configuration allows efficient use of floor space while providing dependable heat.

  • Wall-mounted installation frees up usable room space
  • Compact cabinet fits well in apartments, cabins, and supplemental heating zones
  • White finish blends with most interior décors

LIQUID PROPANE FUEL COMPATIBILITY
Designed specifically for LP fuel applications where natural gas is not available.

  • Optimized for liquid propane fuel systems
  • Suitable for residential and light commercial installations
  • Compatible with Rinnai-approved venting and accessories

Specifications

Specifications

Width: 29 7/8"
Height: 22 7/8"
Depth: 10 1/8"
Weight: 57 lbs.
Approved Gas Types Natural Gas or Propane
Minimum/Maximum Gas Rate (Input BTUs) Natural Gas: 8,200 - 21,500 BTU
Minimum/Maximum Gas Rate (Input BTUs) Propane: 8,200 - 20,700 BTU
AFUE Rating Natural Gas: 81%
AFUE Rating Propane 82%
CFM: 111.3 - 162.7
Electrical: AC 120 Volts, 60 Hz, 52 Watts
Noise Level: 33 - 38 dB
Gas Connection: 1/2" FNPT
Temperature Range (Min-Max): 60°F - 80°F in 2° Increments

 

Literature

Support

Support

Diagrams, Troubleshooting, and Support - Learn More

   
Product FAQ

What fuel type does the Rinnai EX22CWT-P use?

The EX22CWT-P is designed for liquid propane (LP) fuel.

Is this wall furnace thermostat-ready?

Yes. It is thermostat-ready and requires a compatible external wall thermostat.

What type of venting does the EX22CWT-P use?

It uses a sealed direct vent system for combustion air intake and exhaust.

Is the unit designed for wall mounting?

Yes. The EX22CWT-P is specifically designed for wall-mounted installation.

What color is the furnace cabinet?

The furnace features a white exterior cabinet finish.

Should installation follow manufacturer guidelines?

Yes. Installation must follow Rinnai instructions and applicable building codes.

Customers who bought this item also bought

To top