The newest edition to the Toyostove line of high efficiency direct-vent heaters, the Toyostove Laser 60AT with wood fireplace design.
Attractive, rustic, antique-finish cabinet with ceramic simulated logs suited for rustic or residential settings. Perfect for cottage/cabin, living room, family room...or any room!
EFFICIENT AND ECONOMICAL
Toyotomi Laser products are the most fuel-efficient, energy saving, oil* heating systems available.
- Uses up to 50% less fuel for heating comparable size areas than conventional oil-fired heating systems at a fraction of the cost
- Pays for itself in fuel savings in just a few short years
- Special stainless steel heat exchanger ensures the highest efficiency rate
The Lasers series large circulation fan distributes heat quickly and evenly in order to maintain and optimize maximum comfort.
- Automatically regulate between low, medium and high temperature settings
- Self shut-off when room rises approximately 4° above the desired temperature
CLEAN, SAFE & ODORLESS
Advanced heating pipe-within-a-pipe forced flue venting system creates smokeless, odorless, clean heating.
- Lower emissions (up to 50% less CO2) than conventional oil-fired heating systems
- Outside pipe brings in outside air for combustion
- Inside pipe exhausts all combustion by-products to the outside
- Circulating fan distributes heat
- Cool-to-the-touch cabinet
- Permanent mesh filter protects circulation fan and interior components from dust
- Electric surge protector and shut-off safety system
Owner's manual provides complete, step-by-step instructions that are helpful and easy to understand.
- Installation takes about three hours, or less
- Vents through a side wall using the direct vent kit which is included with heater
- Full range of optional parts and accessories available offers a variety of different installations
FLEXIBLE FUEL OPTIONS
Toyostove Vented Heaters can use the following fuels without any modifications to the unit:
- Ultra Low Sulfur Heating Oil (ULSHO)
- Ultra Low Sulfur Diesel (ULSD)
- #1 Low Sulfur Fuel Oil, or K-1 Kerosene
Check with your local fuel oil dealer for which of these fuels are available in your area. EXHAUST SYSTEM
The Laser Series flue pipe makes venting to the outside simple and easy. Completely flexible, it adjusts to wall thickness. A small vent cap is all that can be seen from the outside. SET-BACK
Weekly Timer Operation allows for up to 30 different Set-Back temperatures. The Weekly Timer can be used to change the temperature for different days of the week and several times during the day.
|Type of Heater:||Forced Flue Vented Heater (Antique Finish)|
|Fuel Type:||ASTM D3699 K1 KEROSENE
ASTM D396 NO.1 LOW SULFUR FUEL OIL
ASTM D975 ULTRA LOW SULFUR HEATING OIL/ DIESEL
|Electric Rating:||120V AC 60Hz
Preheat 270 Watts
Buring 60 Watts
|Heating Efficiency:||87% (AFUE RATING)|
|Heating Rating:||30,000 BTU/hr (High)
21,000 BTU/hr (Medium)
12,000 BTU/hr (Low)
|Fuel Consumption:||0.230 gal/hr (High)
0.161 gal/hr (Medium)
0.095 gal/hr (Low)
|Size (WxHxD):||30" x 24" x 19"|
|Heating Area: *||1,250 Sq. Ft. at (0°F)
1,500 Sq. Ft. at (20°F)
|Vent Hole Pipe:||2-3/4" - 3" diameter|
|Max. Length of
Vent Pipe System:
|Maximum 10 ft, 3 bends or less|
|Type of Tank:||Exterior Tank (required)|
* 0° F Heat Load = 24 BTU/ft²/hr
20° F Heat Load = 20 BTU/ft²/hr
Room size for which this heater is suitable will vary depending on outside temperature, house insulation, window size and other factors.