Zoom

Duravent Stove Pipe DuraTech Finishing Collar, 5"

9355

Status: In Stock

US$24.66

Special Handling Required: Yes

Description

Description

The Duravent 9355 is a Finishing Collar, 5" from the Duravent DuraTech line, 5 inch diameter. Finishing collar that trims the opening around the pipe at a ceiling or support box.

DuraTech is Duravent's Class A all-fuel chimney system: a double wall pipe with a stainless steel inner liner and insulation for wood stoves, fireplaces, and oil or gas appliances that need a factory built chimney. Every DuraTech component is listed as part of the system, so use matching DuraTech parts throughout the run to keep the listing and the clearances valid. Check the appliance manual for the vent size and type it requires before ordering.

Rural Energy stocks the full Duravent DuraTech line, along with the stoves and heaters it vents, and ships to dealers, contractors, and homeowners.

Features

Features

DURAVENT DURATECH
Listed component of the DuraTech Class A all-fuel chimney system.

  • 5 inch diameter, fits other DuraTech components of the same size
  • Factory built and tested to the system listing
  • Use matching DuraTech parts throughout the run

IN STOCK AT RURAL ENERGY
Rural Energy keeps Duravent venting on the shelf and ships it fast.

  • Ships quickly to dealers, contractors, and homeowners
  • Help from Rural Energy support staff planning a complete vent run
  • Part of the full Duravent line we carry

Specifications

Specifications

Part Number:9355
Brand:Duravent
Product Line:DuraTech
Component:Finishing Collar, 5"
Diameter:5 inch
Use:Class A all-fuel chimney

Literature

Literature

Support

Support

 
People Also Ask:

Q. What is the DuraVent 9355 DuraTech 5-inch Finishing Collar used for?

A. The DuraVent 9355 DuraTech 5-inch Finishing Collar is a genuine trim component designed to provide a clean, finished appearance where a compatible 5-inch DuraTech chimney passes through a ceiling support box or wall support assembly. It helps conceal gaps around the chimney while maintaining the professional appearance of the installation.

Q. Is the DuraVent 9355 Finishing Collar compatible with all 5-inch chimney systems?

A. No. The DuraVent 9355 Finishing Collar is designed specifically for genuine 5-inch DuraTech chimney systems. It should only be used with compatible DuraTech components to ensure proper fit, appearance, and compliance with the system's listing.

Q. Does the DuraVent 9355 Finishing Collar improve chimney performance?

A. No. The DuraVent 9355 Finishing Collar is primarily a finishing and trim component. It enhances the appearance of the installation by covering exposed openings around the chimney but does not affect draft, chimney performance, or appliance efficiency.

Q. Where is the DuraVent 9355 Finishing Collar installed?

A. The DuraVent 9355 Finishing Collar is typically installed at the lower end of a ceiling support box or wall support assembly to provide a finished appearance around the chimney pipe. Installation should follow the current DuraTech installation instructions for your specific venting configuration.

Q. Can the DuraVent 9355 Finishing Collar be used with another manufacturer's chimney system?

A. No. The DuraVent 9355 Finishing Collar is engineered specifically for the DuraTech chimney system. Mixing chimney components from different manufacturers or incompatible product lines is not recommended because it may affect fit, appearance, and system certification.

Q. Is the DuraVent 9355 Finishing Collar easy to install?

A. Yes. The DuraVent 9355 Finishing Collar is designed for straightforward installation as part of a compatible DuraTech chimney system. For the best results and continued compliance with manufacturer requirements, installation should follow DuraVent's published instructions.

Q. What is included with the DuraVent 9355 Finishing Collar?

A. The DuraVent 9355 package includes one genuine 5-inch DuraTech Finishing Collar. Additional chimney components, support assemblies, and installation accessories required for a complete venting system are sold separately unless otherwise specified.

Q. Is the DuraVent 9355 Finishing Collar required for every DuraTech installation?

A. The need for a finishing collar depends on the specific DuraTech installation configuration. Many installations use one to provide a clean finished appearance where the chimney passes through a support assembly, but the required components should always be confirmed using the DuraTech installation guide.

Q. What should I verify before purchasing the DuraVent 9355 Finishing Collar?

A. Before purchasing, verify that your chimney system is a genuine 5-inch DuraTech installation and confirm that part 9355 is specified for your support assembly or chimney configuration. Checking compatibility before ordering helps ensure proper fit and installation.

Q. Why buy the DuraVent 9355 Finishing Collar from RuralEnergy.com?

A. RuralEnergy.com supplies genuine DuraVent chimney components backed by experienced technical support and decades of expertise in residential and commercial venting systems. Purchasing the DuraVent 9355 DuraTech 5-inch Finishing Collar from Rural Energy helps ensure authentic parts, proper compatibility, and dependable customer service for your chimney installation.

Customers who bought this item also bought

To top