Osburn Fusio Log Holder

The AC02627 Fusio and AC02350 Equiss are both freestanding fireside log holders from Osburn made in Canada. The key differences are in their design, material composition, and assembly. The Fusio features a curved shape in a combined steel and cherrywood construction that creates a distinctive contemporary presence through the contrast of two premium materials. The Equiss features a flat intersecting two-panel all-steel design that assembles by slotting the two panels together in seconds and disassembles just as quickly for flat off-season storage. The Fusio is a more permanent-looking fireside piece while the Equiss emphasises compact disassembly for off-season storage. The choice between the two is primarily a matter of design preference and whether seasonal disassembly and compact storage is a priority.

Cherrywood is a fine-grained hardwood known for its warm reddish-brown tone, smooth surface, and attractive natural grain pattern. Its use in the Fusio log holder introduces a natural material warmth and visual richness to the piece that an all-steel design cannot replicate, creating a material contrast with the steel components that makes the holder more visually distinctive. Cherrywood is also a structurally suitable material for the structural or decorative components of a fireside log holder, providing the required rigidity and durability for holding a firewood load at the hearth. The combination of steel and cherrywood reflects the approach used across several items in the Osburn hearth accessory range, including the AC02620 Duplex Fireplace Tool Set.

No. The Fusio log holder is designed for indoor use alongside the wood stove or fireplace installation. Exposing the cherrywood and steel construction to outdoor weather conditions — including rain, humidity, frost, and direct sun exposure — would cause the cherrywood to deteriorate and the steel to corrode over time. The holder is designed to sit indoors at the hearth as a fireside log storage piece, providing a convenient and attractive working supply of seasoned firewood within easy reach of the stove or fireplace for reloading.

The Fusio log holder measures 20 inches high by 18-1/2 inches wide by 24 inches deep, providing a generous 24-inch depth for stacking firewood and an 18-1/2-inch width between the holder's side members. This footprint accommodates a comfortable working supply of split firewood — typically sufficient for several reloading cycles — keeping a convenient short-term supply close at hand at the hearth without requiring frequent trips to an outdoor wood storage area. The holder is intended as a fireside working stock storage solution rather than a primary long-term firewood storage unit for large quantities of wood.

Yes. The AC02627 is a universal fireside accessory that is listed as a recommended optional accessory across multiple Osburn stove product pages including the Osburn Gusto wood-burning cookstove. As a freestanding fireside log holder, its compatibility is not dependent on the specific stove or insert model it is positioned alongside — it provides firewood storage convenience for any wood-burning heating appliance installation where attractive and practical fireside log storage is desired.

The AC02627 Fusio log holder pairs naturally with the Osburn fireplace tool sets — the AC02620 Duplex tool set, which also features a steel and wood hybrid construction, provides a particularly complementary material language alongside the Fusio. The AC02621 Ineo and AC02622 Papyrus tool sets in all-steel designs also complement the Fusio's contemporary aesthetic. The AC07835 digital moisture reader supports fuel preparation by confirming firewood moisture content before logs are stacked in the holder, and the AC01380 Start Up Kit provides additional maintenance consumables for new stove owners.